LN-25X with CrossLinc Technology
FULL CONTROL OF YOUR SYSTEM WITH NO CONTROL CABLES
Reduce job site clutter by removing cumbersome control cables
Eliminate unnecessary movement of personnel across the worksite
Eliminate the need to drag control cables around the site
Full voltage control at the feeder results in the correct settings for every weld
Accurately compensate for voltage drop across long cable runs
Eliminate unintentional machine adjustments
Set up faster with fewer cable connections
Eliminate helpers or trips to the power source when making setting adjustments
Minimize rework with easy settings adjustment
Fully encapsulated and environmentally protected electronics
Replaceable flame resistant case can be installed in under five minutes
CROSSLINC™ TECHNOLOGY: SOLVING SITE WELDING ISSUES
Worker safety, weld quality, productivity and equipment reliability come to mind when welding on site or on large structures. In these environments, it is typical for the operator to work closely with a rugged, compact and lightweight wire feeder, connected to a weather-resistant power source hundreds of feet away. Until now, portable wire feeders have been available in two configurations: basic ‘across-the-arc’ models or portable feeders equipped with an added control cable.
‘Across-the-arc’ models are powered by the weld cable. This configuration provides benefits of fewer cables running back to the power source, but voltage control at the point-of-use is not possible.
The addition of a control cable to the system allows the operator to adjust voltage at the point-of-use, but these cables can be costly and add additional complexity to the production environment.
There has to be a better way.
Portable and light weight field construction wire feeder
CrossLinc technology provides voltage control on the feeder when paired with a CrossLinc compatible power source. No control cables are needed.
TVT compensates for voltage drop across long weld cable lengths, allowing you to weld with the voltage you set at the feeder
Included Tweco® or Twistmate®(Dinse®) input power connection. Flowmeter and non-flowmeter models available.
Integrated flowmeter included
LN-25X wire feeder w/TVT Tweco style plug on electrode cable
Flow meter integrated into the machine
Product Weights & Dimensions
|Dimensions (H x W x D)||15 in x 8.7 in x 23.2 in (381 mm x 221 mm x 589 mm)|
|Net Weight||37 lbs (16 kg)|
|Max Rating||450 A|
Wire and TIG Feeders
|Number of driven rolls||2 rolls|
|Max spool diameter||300mm|
|Max Wire Diameter (Solid)||1/16 in (1.6 mm)|
|Max Wire Diameter (Cored)||5/64 in (2 mm)|
|Gun Bushing||Tweco #2-#4|
|Wire Feed Speed Range (IPM)||50-700|
|Wire Feeders Processes||
|Safety Listing CSA||Yes|
|Safety Listing UL||Yes|
|Input Voltage||15-110 VDC|
Construction & Field Erection