Lincoln Electric Cross Country 300 Diesel Welder/Generator with LN-25 PRO Dual Power Wire Feeder Package

Lincoln Electric Cross Country 300 Diesel Welder/Generator with LN-25 PRO Dual Power Wire Feeder Package

By: Lincoln Electric
SKU:
K4166-1 w/ K2614-6
$25,500.00
$30,963.00
SAVE $5,463.00
Current Stock:
Adding to cart… The item has been added

Set up your truck for pipeline stick welding and field wire welding with the Lincoln Electric Cross Country 300 and LN-25 PRO Dual Power. The Kubota diesel-powered Cross Country 300 supplies welding and generator power from the truck. When the job calls for MIG or flux-cored wire, carry the LN-25 PRO to the joint and adjust wire feed speed where you’re working.

Features

  • Pipeline welding — Dual output controls let you fine-tune the stick arc for root, fill, and cap passes. The Cross Country 300 also supports constant-voltage wire welding and DC TIG.

  • Jobsite power — The Kubota V1505 diesel engine drives a generator rated for 10,000 watts of continuous single-phase power or 11,000 watts of continuous three-phase power for tools and equipment.

  • Portable wire feeding — The LN-25 PRO Dual Power can run across the arc or with a compatible 14-pin control cable. Its Maxtrac drive feeds wire at 50–700 inches per minute, with digital displays for monitoring settings at the feeder.

What’s Included

  • Lincoln Electric Cross Country 300 Kubota diesel welder/generator (K4166-1)
  • Lincoln Electric LN-25 PRO Dual Power wire feeder (K2614-6)
  • Internal Contactor
  • Gas Solenoid
  • Flowmeter
  • Arc Sensing Lead Clip - 15 ft. (4.5 m)
  • 2 Gun Bushings (K1500-2 installed; K1500-1 loose)
Spec Sheet Click to Download
Product Info Click to Download
Operator's Manual Click to Download
Product Info Click to Download

You May Also Need