Harris Model QC9501 stainless steel and brass preformed twin tip using alternate fuel gases.
Harris Model QC9501 preformed twin tip is designed for return bend brazing where the tip can rest on the coil base plate protecting the plate and directing the flame on the joint. Also, it is used for other applications where space is limited, and the heat needs to be precisely directed. This model is 7 in. long and features two pre-bent tubes with a 0.62 in. gap between them, a 5/16 in. - 27 inlet connection and an upward flame angle.
Features
- Stainless steel tip and brass base construction
- Pre-bent twin tubes with 0.62 in. gap and upward flame angle
- 7 in. long
- Use with low-cost alternate fuel gases
- Marked with model number for easy identification
- Typical application is return bend brazing and applications requiring precisely directed heat
