Harris 600 all-purpose powder brazing flux 1 ea. 50 lb. pail.
Harris 600 brazing flux is an all-purpose powder flux for use with bronze alloys. This highly active flux can be used dry by dipping the heated alloys into the powder or formed into a paste by mixing with water (20% approx.). Applications include steels, cast irons and copper base alloys. Remove residues with a hot water rinse to yield a bright, clean, strong and porosity-free brazed joint. Complies with the EU Reach & RoHS directive.
Features
- Used with oxy-fuel braze-welding using low fuming bronze and nickel silver rods on steel, copper and cast iron
- Applied to the rod by preheating the rod end and dipping the rod into the flux
- Flux will adhere to the heated rod
- General purpose brazing flux
- Activity range of 1400°F - 2200°F ° (760°C - 1204°C)
- Complies with ANSI/AWS A5.31 Type FB3-J
- Complies with the EU Reach & RoHS directive
