Harris Alloy 26 1/8" Aluminum Stick Electrodes - 00026600POP

By: Harris Products Group
Current Stock:
Adding to cart… The item has been added

HARRIS®26 aluminum alloy electrode features a precise combination of core alloy and coating, providing high speed deposition of dense, machinable welds. It is widely used on sheets, tubes and extrusions. Also suited for torch applications. Conveniently packaged for point-of-purchase display.


  • Produces strong, porosity-free welds without excessive spatter or fuming
  • Precise combination of cored wire and coating, providing high speed deposition of dense welds
  • Good corrosion resistance
  • Good electrical conductivity
  • Good color match
  • Widely used on sheets, tubes and extrusions for thicknesses of 1/8" or more
  • Tensile strength - 34,000 psi
  • Preheat to 500°F is recommended on sections greater than 1/8"

General Alloys

Alloy Type Specialty
Chemical Composition Aluminum Remainder%
Aluminum Fluoride 1-11%, Magnesium 0.05% max., Copper 0.40% max., Manganese 0.05% max., Lithium Fluoride 1-11%, Silicon 1-11%, Zinc 0.10% max., Magnesium Fluoride 1-11%, Iron 0.80% max., Potassium Chloride 1-11%, Potassium Fluoride 2-12%, Sodium Chloride 1-11%
Classification Manufactured to Harris' Internal Engineering Standards
Color Good color match
Diameter 1/8"" (3.18mm)
Electrical Conductivity (%IACS) Good
Material Aluminum
Product Type SMAW Electrode
Tensile Strength (PSI) 34,000 psi


Brinnell Hardness Manufactured to Harris Internal Engineering Standards


Warranty 1 Year