Model 6290-VVCU is a high-speed oxy-propane/natural gas machine cutting tip with an unplated brass shell (0.088 cup depth). This tip maximizes kerf while increasing cutting speeds to reduce heat input. The tip produces high-quality cuts thus reducing afterwork. The 6290-VVCU economical machine cutting tip for use with propane/natural gas
Features
- Two-piece machine cutting tip
- Unplated brass outer shell with brass inner shell (.062 cup depth)
- For use with low cost alternate fuel gases - propane/natural gas (NOT FOR USE WITH ACETYLENE)
- Minimizes kerf
- Increased cutting speeds reduce heat input
- High quality cuts reduce afterwork
- Engraved with model number and tip size for easy identification
- One year manufacturer's warranty
Equipment
| Cutting Oxygen Consumption SCFH | 15 |
| Cutting Oxygen PSIG | 40 |
| Cutting Speed (IPM) | 20 |
| Kerf (Approx.) in. | .05 |
| Material Thickness | 3⁄16 |
| Natural Gas Consumption SCFH | 15 |
| Oxygen Consumption SCFH | 30 |
| Preheat Fuel Gas PSIG | 4 oz.-2PSIG |
| Preheat Oxygen PSIG - High Pressure | 15 |
| Preheat Oxygen PSIG - Low Pressure | 8 |
| Propane Consumption SCFH | 6 |
| Tip Size / Number | 5/0 |
Warranty
| Warranty | 1 Year |
