DESCRIPTION

One-Pak comes with the Flextec 650X multi-process welder, Flex Feed 84 wire feeder, Magnum PRO Curve 400 welding gun, and flowmeter regulator.

HEAVY-DUTY POWER. SIMPLIFIED. The Flextec 650X delivers up to 815 amps of multi-process power for heavy-duty applications like construction, shipbuilding, and fabrication. With CrossLinc Technology, you can control output directly at the arc without additional cables, increasing productivity and safety. This Ready-Pak combines the Flextec 650X with the Flex Feed 84 heavy duty wire feeder, Magnum PRO Curve 400 welding gun, and flowmeter regulator. The Flex Feed 84 wire feeder offers high torque consistent feeding over long conduit runs, with wire diameter up to 3/32 in. (2.4 mm) solid or 0.120 in (3.2 mm) cored wire. The patented MAXTRAC heavy-duty cast aluminum wire drive system protects and guides the wire using tool-less split wire guides to prevent birdnesting. The Magnum PRO Curve 400 welding gun combines the classic Curved handle with Copper Plus contact tips to deliver long hours of fabrication welding with less frequent parts changes.

Features

High-Power Output - 815 amps for Stick, TIG, MIG, and flux-cored welding
CrossLinc Technology - Remote control at the arc with cables
Rugged & Reliable - IP23-rated for outdoor use and flexible with global voltage inputs
Simplified User Interface - User weld schedule memory storage allows easy recall of your critical or often repeated weld procedures
Tool-less Drive Rolls & Wire Guide Installation - Four gear-driven wire rolls slide on and off
Heavy Duty Wire Reel Stand - Equipped with a quick release spool holder that holds spool sizes up to 60 lbs.

What's Included

Flextec 650X Multi-Process Welder & Flex Feed 84 One-Pak
Weld Power Cable - Lug to Lug (3/0, 600A, 60%) - 10 ft. (3 m) | K1842-10
Work Lead - Lug & GC500 Ground Clamp (4/0, 600A, 60%) - 15 ft. (4.6 m) | K2149-1
Control Cable Extension - Male 14 pin to Female 14 pin - 10 ft (3 m) | K1797-10
Drive Roll Kit .035, .045 (0.9, 1.2 mm) Solid Wire | KP1505-1
Cable Liner .052-1/16 in (1.3-1.6 mm) 15 ft (4.6 m) | KP44-116-15
Magnum PRO Curve 400 Welding Guns | K2952-2
Connector Kit - LF-72-74, LN-25 Pro, Power Feed 25M | K466-10
Flextec 650X Multi-Process Welder with CrossLinc Technology | K3425-1
Drive Roll Kit 1/16 in (1.6 mm) Cored Wire | KP1505-1/16C
Model 355-2Ar-58010 Flowmeter Regulator Shielding Gas Kit | 3100211
Flex Feed 84 Single Bench with Heavy Duty Wire Reel Stand | K5000-2