LIMITED-TIME OFFER (US Only)!
Buy a Lincoln Tomahawk 30 Air Plasma Cutter and receive a $400 VISA gift card rebate.
Redeem Rebate Here 
Add accessories and filler metals for more savings:
- Spend $100 in qualifying products** to get a $50 Rebate
- Spend $250 in qualifying products** to get a $100 Rebate
- Spend $500 in qualifying products** to get a $200 Rebate
**Qualifying Stack and Save products are Lincoln Electric accessories and filler metals. Excludes welders and plasma cutters. Stack & Save offer only available with purchase of rebated machines. Only one Stack & Save rebate per receipt/invoice. Qualifying purchases must be made at Lincoln Electric authorized U.S.
Lincoln Tomahawk 30 Air Cutter - PLASMA CUTTING WITH BUILT-IN AIR
The Tomahawk® 30 Air plasma cutting system arrives ready to go for fast and precise cutting. With its built-in air compressor, this machine is perfect for anyone who needs a reliable, portable cutting tool. With the Tomahawk 30 Air, forget the grinder – simply pick up the torch and cut in seconds. Plus, it also has external air capabilities, so you can use it with an external compressor if you need to. So whether you’re working in your garage or out in the field, the Tomahawk 30 Air is the perfect tool for the job.
Features
- Ultimate Portability – Internal air compressor enables operation in environments where external compressed air is not available.
- Continuous Output Control – Focus the arc for various material thickness.
- Touch Start system – Reliable plasma arc initiation without high frequency.
- Rapid Arc Restrike – Fast cutting through gaps, even expanded metal.
- Front Panel Purge Control – Makes it easy to set the air flow rate without initiating the plasma arc.
- Cool Operation, Long Consumable Life - Enhanced swirling airflow keeps the electrode and tip cool and increases the life of consumables.
- Added Safety – Our Parts-in-Place system detects correct installation of consumables and torch.
- Engine Drive Compatible – Select a Lincoln Electric recommended engine driven welder / generator to power your Tomahawk in remote locations.
Cutting Capacity »
Recommended - 5/16"
Maximum - 3/8"
Severance - 1/2"
Processes »
Plasma Cutting & Grid
Applications »
On site maintenance, Small construction sites, Air ducting installation (HVAC), Demolition work, Rental
What'S Included
- (1) Tomahawk 30 AIR Plasma Cutter
- (1) Internal Air Compressor (External Air Connection also Standard)
- (1) K5537-1 LC30 Hand Torch and 10 ft (3 m) Cable
- (3) KP2842-1 Electrode
- (3) KP2842-6 Nozzle 30A
- (2) KP2842-4 Swirl Ring
- (1) KP2842-3 Retaining Cap (Internal Air-2 Holes)
- (1) KP2842-5 Drag Spacer
- (1) KP2842-7 Retaining Cap (Internal Air- 6 Holes)
- (1) Air Regulator and Pressure Gauge
- (1) Internal Water Separator
- (1) Work Clamp and Cable
- (1) Shoulder Strap
- (1) Input Power Cord
General Specifications
- Input Voltage - 230/1/60
- Gas Supply - Air or Nitrogen
- Gas Pressure Required - 80 - 110 psi (6 -7.5 Bar)
- Max Rating - 30 Amps
- Output Range - 15 - 30 Amps
| Spec Sheet | Click to Download  |
|---|---|
| Operator's Manual | Click to Download |
