Hypertherm Powermax 30 XP Plasma Cutter with 15ft Torch - 088081

The Powermax30 XP is a highly portable plasma cutter designed to handle a wide range of jobs. A unique “two-in-one” design provides high-power capability for thick metal cutting, as well as FineCut consumables for detailed, thin metal cutting. In addition to cutting any electrically conductive metal, such as mild steel, stainless steel, or aluminum, this 30-amp plasma cutter can also gouge metal. The Powermax30 XP boasts dual-voltage capabilities. In addition to 240 V, you can plug it into a standard household socket and use as a 120 V plasma cutter.

Includes

• Hypertherm Powermax 30 XP Power supply, 15 ft. (4.5 m) Duramax LT hand torch with standard consumables, 15 ft. (4.5 m) work clamp
• 240 V/20 A plug with adapters for 120 V/15 A and 240 V/20 A circuits
• Operator and safety manuals
• Consumable kit with 1 standard nozzle, 1 electrode, 1 Fine Cut nozzle and 1 Fine Cut deflector
• Carrying strap

Benefits

Easy to use

• System includes everything you need to get you cutting quickly and easily
• Small size and light weight let you take the Hypertherm Powermax 30 XP just about anywhere
• Plug into any 120 or 240 V power (convenient Auto-Voltage technology and plug adapters included)

Superior performance in a compact package

• Fast cutting speeds and excellent cut quality let you finish jobs quicker, with fewer secondary operations
• Built to withstand heavy-duty use in the most demanding environments

Two-in-one design for maximum versatility

• High-power cutting on thick metal
• Fine Cut consumables enable high quality cuts on thin metal, leaving a clean edge and a narrow kerf

Cutting with 120 V input power

Use Fine Cut nozzle and deflector for cutting at 120 V input power. When operating at the maximum recommended output of 25 A, the cut capacities are:

• 6 mm (1/4") at 482 mm/min (19 ipm)
• 10 mm (3/8") at 203 mm/min (8 ipm)
• 12 mm (1/2") at 76 mm/min (3 ipm)

Hypertherm Duramax LT torch

• Designed to withstand impact and heat.
• Twice the consumable life* and 70% more efficient on average for lower cost of cutting.

Operating data

• 3/8" at 20 ipm
• 1/2" at 10 ipm
• 5/8" at 5 ipm

Cutting with 120 V input power

Use Fine Cut nozzle and deflector for cutting at 120 V input power.  When operating at the maximum recommended output of 25 A, the cut capacities are:

• 1/4" at 19 ipm
• 3/8" at 8 ipm
• 1/2" at 3 ipm